Wps push button how to#
Wps push button serial#
Wps push button password#

Press 'OK' to continue., you may manually configure your router’s wireless settings. Refer back to your client device for further instructions. If you encounter problems with the WPS setup such as Connection Failure! Your client device failed to connect to the network. Your device should now be connected to your router wirelessly using WPS. When your device prompts for the router’s WPS PIN, enter your router’s unique PIN.Īfter entering the PIN, follow the onscreen instructions for your client device. IMPORTANT: The router’s PIN may vary according to the device being used.

Wps push button serial#

Take note of the router’s WPS PIN on the third item of the Wi-Fi Protected Setup™ screen.Īlternatively, you can also find the Linksys router’s PIN at the bottom of your router together with the Serial No. Use this method if your client device asks for the router’s Personal Identification Number (PIN).

Wps push button password#

Leave the User name field blank and enter “admin” on the Password field then click OK.Įnter your client device’s PIN in the blank field then click the Register button.Īfter the configuration process, your device should now be connected to your router wirelessly using WPS. You will be asked for your log-in details. Open any web browser (Internet Explorer, Mozilla Firefox, or Safari®) and enter “192.168.1.1” on the Address bar then press. If you’re not sure where to get your client device’s WPS PIN, refer to its product documentation.Īccess your router’s web-based setup page. This method assumes that you already have your client device’s PIN. Use this method if your client device has a WPS Personal Identification Number (PIN). , you may manually configure your router’s wireless settings.

Wps push button how to#

NOTE: To learn how to use the WPS feature on your client device, refer to its documentation. Within 2 minutes, click the WPS button on the client device that you want to connect to the router’s wireless network. Leave the User name field blank and enter “admin” on the Password field then click OK. To access your router’s web-based setup page, open any web browser (Internet Explorer®, Mozilla Firefox®, or Safari®) and enter “192.168.1.1” on the Address bar then press.

Alternatively, you can access your router’s web-based setup page and configure WPS from there by just clicking on the same WPS button found on the first item. Locate and press the WPS button on your router. Use this method if your client device has a WPS button or if it prompts you to press the WPS button on your router. Refer to your product documentation for the detailed features of your router. Some Wireless-G routers may not have a WPS feature. The WPS button is located either on the front or back panel of your Linksys device. NOTE: WPS configures one device at a time. This article will provide three methods that you can follow depending on what client device you are using to connect to the router through the WPS feature.Ĭonnecting a device using the router’s WPS PIN Wi-Fi Protected Setup™ (WPS) is a feature that lets you easily connect WPS-supported client devices, such as wireless printers, to your router wirelessly.